DIY Over the Door Sign
I found the unfinished wood at Home Depot. I bought two 1 in. x 4 in. x 39” Spruce/Pine/Fir Common Board Bed Slats @ $2.96 a piece.
The vinyl I used was Cricut removable vinyl. It actually wasn’t easy to remove when I made a mistake, that was disappointing.
The 2” font was Courgette and I cut black vinyl. I had to make it fit on the 12” x 12” vinyl sheet. After cutting it out with my Cricut Explore Air, I cut sections of the words and used transfer paper to adhere to the painted wood.
As far as the removeable vinyl goes, it didn’t want to remove when I made a mistake. OOPS! Oh well, we will see how long it will last until I can't stand looking at my mistakes. 🤣
To hang them I used 3M Command strips which, with my experience, usually work very well .
What are your thoughts? Would you try and make something similar? We’d love to hear from you, please comment below.
Stay safe & sassy!
Kelly
Sassy Silver Sisters
Cathy, Rhonda & Kelly
💓💓💓
Thank you for following us and if you haven't already subscribed to receive our weekly blog post, just click on the SUBSCRIBE button on the right of this page and you will be the first to find out what's going on in our sassy brains. 😉
Also, if you are interested in getting a weekly recipes, that have been tested and approved by one of us sisters, all you have to do is sign up to our blog and you will automatically receive a weekly recipe. 🍲
FTC DISCLAIMER: This blog post is NOT SPONSORED. All opinions are our own, honest opinions. The links are for easy access & if you choose to use these links we are in no way compensated.
Comments
Post a Comment